Measurements of mechanical and thermal transport properties have been made on the blends of cis-polyisoprene (CPI) and trans-polyisoprene (TPI) prepared by a solution casting method. Characterization of these blends has been done using wide angle X-ray scattering. Thermo-mechanical, mechanical, and thermal transport properties have been determined employing dynamic mechanical analyzer (DMA) and transient plane source. Storage modulus and tan delta as determined from DMA have been found to increase and decrease with the increase in TPI content, respectively. Mechanical properties such as Young's modulus and tensile strength, as determined from strain-stress behavior of CPI/TPI blends, have been found to increase with increasing TPI content. This increase in properties has been explained on the basis of the crosslink density, calculated using theory of rubber elasticity. Thermal transport properties such as thermal conductivity, thermal diffusivity, and volumetric heat capacity are higher for all the three blends as compared to their pure components.