An enhancement-load inverter using bottom-gated ZnO nanoparticle thin-film transistors and a polymer gate dielectric is demonstrated. The deposition of the ZnO active layer is done by spin coating of a colloidal dispersion and is hence cost-effective. Since the maximum process temperature is 200 degrees C, the presented device is furthermore suitable for plastic substrates. Although hysteresis is observed, the inverter shows reasonable transfer characteristics with a gain of up to 5.5 V/V at a supply voltage between 10 V and 15 V. whereas the static power dissipation is lower than 6 mu W. (C) 2011 Elsevier Ltd. All rights reserved.