Foam flow experiments were carried out to study the influence factors such as surfactant concentration, foam quality, injection rate of liquid and gas, permeability of porous media, temperature, and oil saturation on blocking ability and flowing characteristics of steady foams in porous media. Foam blocking mechanisms and flowing characteristics were summarized according to the experimental results and foam migration behavior. The results showed that the pressure distribution of flowing foams was linearly descending in porous media at steady state. The results further showed that the foam size and quality in pores along the sand pack were almost uniform, that is, foam generation and destruction gradually reached dynamic equilibrium at steady state. In porous media, the blocking ability of steady foams increased with the concentration of the foaming agent and the increase in the permeability of porous media, but the blocking ability decreased with the increase in the temperature, the shearing rate, and the oil saturation of the porous media. Foam resistance factor reached maximal value at the foam quality of 85% in porous media.