In the present work as received woven fabrics of polyethylene terephthalate (PET) and polyamide 6.6 (PA6.6) were exposed to a continuous dielectric barrier discharge (DBD), in air at atmospheric pressure, at selected discharge power values and conveyor speeds. The chemical modification of the fabric surface was studied by contact angle analysis, attenuated total reflection (ATR)-FTIR spectroscopy and X-ray photoelectron spectroscopy (XPS). The results confirmed that the treatment changed the fabric surface chemistry, increasing its wettability by polar liquids and its oxygen content. Contact angle results showed different behaviour of the two polymer fabrics toward ageing effects; while PET showed a contact angle increase along the subsequent days of treatment, the PA6.6 fabric maintained its hydrophilicity even 15 days after treatment. The surface morphology analysed by scanning electron microscopy (SEM), did not show any significant difference before and after treatment. (C) 2011 Elsevier B.V. All rights reserved.