화학공학소재연구정보센터
Biomass & Bioenergy, Vol.35, No.1, 454-463, 2011
Modelling natural drying efficiency in covered and uncovered piles of whole broadleaf trees for energy use
Small dimensions regenerated forests are considered a useful fuel resource for small local heat plants in Norway, since it is not relevant for the timber industry. Most small heat plants built so far are constructed for moisture contents of about 35% on wet basis. Therefore, the material must be dried. Because artificial drying induces additional costs, storing the material in piles roadside as whole trees until desired moisture content is obtained is considered beneficial. Traditionally, leaf seasoning has been considered an efficient method. To increase the understanding of these processes, a study on drying whole trees in piles has been accomplished at three different locations with different climatic conditions. The study focuses on the following explanatory variables: harvesting season, location, climatic conditions, position in the pile, tree species, and relative crown length. The effect of covering the piles in order to reduce the moisture uptake during winter was also studied. Models, estimating the moisture content with time profiles, were developed. During spring and summer the moisture content was reduced to approximately 35% also when the material was harvested in the autumn the year before. The climatic conditions were important for the drying result, but drying was effective also in the moist climate in western Norway. Covering the dry piles before the winter was important in order to maintain the requested moisture content. The effect of covering the material harvested in autumn was limited. (C) 2010 Elsevier Ltd. All rights reserved.