Bentonite supported nanoscale zero-valent iron (B-nZVI) was synthesized by the sodium borohydride reduction method, characterized with SEM, and used for aqueous Cr(VI) removal. Bentonite decreased nano-Fe-0 aggregation and thus increase Cr(VI) removal efficiency. At 35 degrees C and 250 r min(-1), 99% Cr(VI) removal was achieved from aqueous solution containing 50 mg L-1 of Cr(VI) by B-nZVI, while only 66% removal was achieved with unsupported nZVI after an experimental duration of 3 h when the Fe-0 loadings were 1.5 g L-1. XRD indicated the existence of iron oxide and iron-chromium hydroxide coprecipitation on the surface of B-nZVI after exposure to an aqueous solution of Cr(VI). Kinetics studies under a series of different conditions showed that reduction of Cr(VI) to Cr(III) could be expressed by pseudo first-order reaction kinetics, with initial Cr(VI) and B-nZVI concentrations, pH and temperature as variables. The apparent activation energy of Cr(VI) remediation by B-nZVI was 21 kJ mol(-1), which was characteristic of a chemically controlled reaction. These results demonstrated that B-nZVI could potentially be used as a new material for use in situ remediation. (C) 2011 Elsevier B.V. All rights reserved.