Polypyrrole (PPy) films (2 mu m) containing titanate nanotubes (TiNT) were deposited from 0.5 mol dm(-3) pyrrole (Py) and 1 g dm(-3) of TiNT in 0.1 mol dm(-3) aqueous oxalic acid on 904 L stainless steel (SS) 0.1 mm thickness at 298 K. Electron microscopy showed that the nanotubes were adsorbed on the PPy surface and uniformly dispersed in the polymer matrix. The PPy/TiNT composite contained < 10 wt.% titanates which showed an increase of 53% hardness compared with polypyrrole alone. The TINT provide nucleation centres to catalyze the polymerization of pyrrole and can adsorb up to 240 mg g(-1) of the monomer. The corrosion rates for SS. SS/PPy and SS/PPy/TiTN composites, evaluated by linear sweep voltammetry and open-circuit potential measurements in 3% w/v NaCl, were 1.61, 0.008 and 0.004 mg dm(-2) day(-1), respectively, indicating that corrosion rates of stainless steel decreased by up to three orders of magnitude in the presence of the composite films. (C) 2010 Elsevier Ltd. All rights reserved.