Three-dimensional porous Cu film is prepared for the first time by electroless plating. Sn-Co alloy is electrodeposited on the porous Cu film to fabricate porous Sn-Co alloy electrode. SEM images evidence that porous Sn-Co alloy electrode presents a three-dimensional porous structure. XRD results show that the Sn-Co alloy electrode comprises pure Sn and CoSn2 phases. Electrochemical discharge/charge results show that the three-dimensional porous Sn-Co alloy electrode exhibits much better cycleability than planar Sn-Co alloy electrode, with first discharge capacity and charge capacity of 636.3 and 528.7 mAh g(-1), respectively. After 70th cycling, capacity retention is 83.1% with 529.5 mAh g(-1). The lithiation and delithiation processes during first discharge and charge were investigated by electrochemical impedance spectroscopy (EIS). EIS results together with differential capacity curves describe the process of SEI formation, charge transfer and phase transformation in the alloy electrode in the first discharge. and phase transformation during charge at delithiation potential. (C) 2011 Elsevier Ltd. All rights reserved.