The purpose of this paper is to investigate the influence of blending methods on the co-gasification of petroleum coke and lignite with CO2 using a thermogravimetric system at 0.1 MPa. The weight loss curves, XRD analysis, SEM images, BET specific surface area, were investigated. It was observed that petroleum coke shows a low reactivity because of the graphitic carbon structure, low catalyst content and small specific surface area. Blending with lignite can get a high reactivity. The co-gasification reactivity was significantly influenced by blending methods. Wet grinding is much effective than dry grinding. Long grinding time made lignite show greater BET specific area. And the sample in long grinding time has more association chances between petroleum coke and AAEM species. The co-gasification reactivity increases linearly with a rise of BET specific area. (C) 2011 Published by Elsevier Ltd.