화학공학소재연구정보센터
International Journal of Heat and Mass Transfer, Vol.54, No.17-18, 3960-3969, 2011
A new mechanistic model for pool boiling CHF on horizontal surfaces
This work proposes a new mechanistic model for predicting the critical heat flux (CHF) in horizontal pool boiling systems. It is postulated that when the vapor momentum flux is sufficient to lift the liquid macrolayer from the heating surface, wetting is no longer feasible, and a transition from nucleate to film boiling occurs. This is the same mechanism that has found success in predicting CHF in flow boiling systems. An experimental investigation of CHF with pentane, hexane, and FC-72 in saturated horizontal pool boiling with chamber pressures of 150, 300, and 450 kPa provides evidence that the new model captures the variation of CHF with pressure reasonably well compared with other well known models. The new model is also compared with existing data from the literature over a reduced pressure range of 2 x 10(-5)-x 10(-1). The mean deviation between the predicted and measured CHF is typically within 20% over the parameter space covered. (C) 2011 Elsevier Ltd. All rights reserved.