Corn starch was modified by propylation and degree of substitution (DS) of four starch modifications were 0.61, 1.56, 2.27, and 2.51. Different films were prepared by blending native and propylated starch with low-density polyethylene (LDPE). The mechanical properties, thermal properties, water absorption capacity, and biodegradability of the blend films varied with the quantity of starch as well as DS. Tensile strength, elongation, and melt flow index of propylated starch blend films were higher compared to the corresponding native starch blend film. These properties improved with increase in DS from 1.56 to 2.51. Propylated starch blend films were found thermally stable than native starch blend films. There was a decrease in water absorption capacity for the films containing propylated starch at high DS. Enzymatic and soil burial degradation results showed that biodegradability of starch-LDPE films increased with the increase in the starch concentration but it decreased with increase in the DS. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 2197-2208, 2011