In this article, a model based on fuzzy logic (FL) for predicting ductile to brittle transition temperature of functionally graded steels in both crack divider and crack arrester configurations has been presented. Functionally graded steels containing graded ferritic and austenitic regions together with bainite and martensite intermediate layers were produced by electroslag remelting. For purpose of building the model, training and testing using experimental results from 140 specimens produced from two basic composites were conducted. The used data as inputs in FL models are arranged in a format of six input parameters that cover the FGS type, the crack tip configuration, the thickness of graded ferritic region, the thickness of graded austenitic region, the distance of the notch from bainite or martensite intermediate layer, and temperature. According to these input parameters, in the FL, the ductile to brittle transition temperature of each FGS specimen was predicted. It has been found that FL model will be valid within the ranges of variables. The training and testing results in the FL model have shown a strong potential for predicting the ductile to brittle transition temperature of each FGS specimen.