Membrane gas absorption technique is one of the most attractive alternatives for CO(2) capture. In this paper, a mathematical model for membrane gas absorption process has been developed to describe the solute concentration profile and the mass transfer behavior near the membrane surface, which are important factors for the process. The finite volume method is used to solve the model. The modeling results show that the different solute diffusing distances in the vertical and parallel directions near the membrane surface result in varied concentration profiles. For the membrane with small pore size, the solute concentration profile near the membrane surface can reach uniform distribution instantly, and the membrane porosity has little effect on mass transfer. Contrarily, for the membrane with large pore size, especially at higher absorbent pH value or liquid velocity, the solute concentration distribution is comparatively non-uniform. The mass transfer is significantly affected by membrane porosity. That is the mass transfer coefficients are varied at different membrane porosities. Experiments are conducted to verify the model for CO(2) removal using flat sheet membrane contactor with de-ionized water or NaOH solution as absorbents. The comparison between the experimental results and the prediction results shows that the model is validated. (C) 2010 Elsevier B.V. All rights reserved.