A process was developed for the microencapsulation of inorganic filler particles with poly-methyl-methacrylate, to increase the interaction between the hydrophilic filler particles and a polymer matrix. The filler utilised was aluminium hydroxide with an average diameter of 1.9 mum and a specific surface area of 5 m(2)/g. The process comprised a surface modification, in which a monolayer of isopropoxy titanium isostearate was chemically bound to the surface to render it hydrophobic and to ensure a chemical bond between the filler and the organic phase. Then, an encapsulation reaction was carried out by means of an emulsion-like polymerization process at monomer starved conditions. The modified particles were stabilized in water with sodium-dodecyl-sulphate. A redox system consisting of cumene-hydroperoxide in combination with sodium-formaldehyde-sulphoxylate and iron(II) salt was applied for the initiation of the polymerization. Besides surface polymer, free polymer particles were also formed. The parameters which varied were the filler concentration, the concentration of the initiator components and the surfactant concentration. At optimum conditions, similar to 50% of the added monomer polymerized at the modified filler surface, thus forming encapsulated filler particles. SEM together with TGA analysis indicated that a smooth polymer layer had been formed on the filler surface. At high filler loading, however, coagulation occurred.