화학공학소재연구정보센터
Korean Journal of Rheology, Vol.10, No.1, 50-56, March, 1998
Polyarylate와 열방성 액정고분자 블렌드의 상용성 및 에스터 교환반응에 대한 연구
Miscibility and Transesterification Reaction of Blends of Polyarylate and Thermotropic Liquid Crystalline Polymer
초록
폴리아릴레이트(PAr)와 열방성 액정고분자(LCP)블렌드의 상용성과 두 고분자 사이의 에스터 교환반응을 시차 주사 열분석기(DSC)와 Fourier transform 적외선 분광분석기(FT_IR spectroscopy)로 연구하였다. DSC를 이용하여 PAr-LCP 블렌드의 유리 전이 온도(Tg)를 관찰한 결과, 두 개의 Tg가 관찰되었다. 측정된 Tg결과로부터 블렌드 각 상에 녹아 있는 두 성분의 상거동을 조사했으며, 그 결과 LCP가 PAr-rich상에 녹아 들어간 양이 PAr이 LCP-rich 상에 녹아 들어간 양보다 더 많음을 알 수 있었다. 이러한 결과는 두 고분자 사이에 부분적으로 상용성이 있음을 의미한다. 액정고분자의 이방성(anisotropy)을 고려하여 PAr-LCP블렌드의 고분자-고분자 상호작용계수(χ12)를 결정하였으며, χ12는 0.069∼0.076의 값으로 계산되었다. 두 고분자사이의 에스터 교환반응을 조사하기 위하여 DSC내에서 열처리한 결과, 열처리 후에 PAr과 LCP의 Tg는 열처리하기 전에 비해 더 큰 폭으로 두 Tg의 중간값으로 이동하였다. 열처리한 PAr-LCP 블렌드를 FT-IR spectroscopy로 분석한 결과, 순수한 PAr과 LCP에 없는 새로운 에스터기의 특성 피이크가 발견되었다. 이와 같은 열분석과 FT-IR spectroscopy 연구 결과로부터 주어진 열처리 조건에서 PAr과 LCP 사이에 에스터 교환반응이 일어났음을 확인할 수 있었다.
Miscibility and transesterification reaction of blends of polyarylate (PAr) and a thermotropic liquid crystalline polymer (LCP) were investigated by differential scanning calorimetry (DSC) and Fourier Transform infrared (FT-IR) spectroscopy. In the thermogram of PAr-LCP blends, two glass transi- tion temperatures (Tgs) were observed. phase behavior of the blends revealed that the LCP dissolved more in the PAr-rich phase than did the PAr in the LCP-rich phase, indicating part- ial miscibility between two polymers. The polymer-polymer interaction parameter(χ12) calculated ranged from 0.069 to 0.076. In the calculation of the χ12, the anisotropy of the LCP was considered. After annealing, the two Tgs of the blends were shifted to ward the center. In the FT-IR spectroscopy study of the annealed PAr-LCP blends, three new characteristic peaks of ester group were detected. The DSC and FT-IR results suggested that transesterification reaction between PAr and LCP occurred under the annealed conditions.
  1. Paul DR, Newman S, "Polymer Blends," vol. 1, p. 1, Academic Press, Inc., New York (1978)
  2. Blizard KG, Baird DG, Polym. Eng. Sci., 27, 653 (1987) 
  3. Yin ZH, Zhang XM, Zhang YJ, Yin JH, J. Appl. Polym. Sci., 63(13), 1857 (1997) 
  4. Zhuang P, KyuT, White JL, Polym. Eng. Sci., 28, 1095 (1988) 
  5. Kiss G, Polym. Eng. Sci., 27, 410 (1987) 
  6. Nobile MR, Amendola E, Nicolais L, Acierno D, Carfagna C, Polym. Eng. Sci., 29, 244 (1989) 
  7. Shin BY, Chung IJ, Polym. Eng. Sci., 30, 13 (1990) 
  8. Hong SM, Kim BC, Whang SS, Kim KU, Polym. Eng. Sci., 33, 630 (1993) 
  9. Ahn TO, Lee SM, Polymer, 34, 4156 (1993) 
  10. Golovoy A, Cheung MF, Polym. Eng. Sci., 29, 85 (1989) 
  11. Porter RS, Wang LH, Polymer, 33, 2019 (1992) 
  12. Kotliar AM, J. Polym. Sci. Macromol. Rev., 16, 367 (1981) 
  13. Miley DM, Runt J, Polymer, 33, 4643 (1992) 
  14. Mondragon I, Nazabal J, J. Appl. Polym. Sci., 32, 6191 (1986) 
  15. Porter RS, Zonza JM, Kimura M, Desper CR, George ER, Polym. Eng. Sci., 29, 55 (1989) 
  16. Oh TS, Ryou JH, Chun YS, Kim WN, Polym. Eng. Sci., 37(5), 838 (1997) 
  17. Kim WN, Burns CM, Macromolecules, 20, 1876 (1987) 
  18. Kim WN, Burns CM, J. Appl. Polym. Sci., 34, 945 (1987) 
  19. Lee HS, Kim WN, Burns CM, J. Appl. Polym. Sci., 64(7), 1301 (1997) 
  20. Flory PJ, "Principles of Polymer Chemistry," p. 498, Cornell University Press, Ithaca, New York (1953)
  21. Lee HS, Jung WH, Kim WN, Polym. Bull., 37(4), 503 (1996) 
  22. Fox TG, Bull. Am. Phys. Soc., 1(2), 123 (1956)
  23. Flory PJ, Macromolecules, 11, 1138 (1978) 
  24. Folkes MJ, Hope PS, "Polymer Blends and Alloys," p. 49, Blackie Academic & Professional (1993)
  25. Friedrich K, Hess M, Kosfeld R, Makromol. Chem. Makromol. Symp., 16, 251 (1988)