The role of surface charge in fluid flow in micro/nanofluidics systems as well as the role of electric field to create switchable hydrophobic surfaces is of interest. In this work, the contact angle (CA) and contact angle hysteresis (CAR) of a droplet of deionized (DI) water were measured with applied direct current (DC) and alternating current (AC) electric fields. The droplet was deposited on a polystyrene (PS) surface, commonly used in various nanotechnology applications, coated on a doped silicon (Si) wafer. With the DC field, CA decreased with an increase in voltage. Because of the presence of a silicon oxide layer and a space charge layer, the change of the CA was found to be lower than with a metal substrate. The CAR had no obvious change with a DC field. An AC field with a positive value was applied to the droplet to study its effect on CA and CAR. At low frequency (lower than 10 Hz), the droplet was visibly oscillating. The CA was found to increase when the frequency of the applied AC field increased from 1 Hz to 10 kHz. On the other hand, the CA decreased with an increasing peak peak voltage at or lower than 10 kHz. The CAR in the AC field was found to be lower than in the DC field and had a similar trend to static CA with increasing frequency. A model is presented to explain the data.