The focus of the development of UV-crosslinkable self-adhesive medical products is on one hand directed toward customer-oriented requirements such as tack, adhesion, cohesion, biocompatibility, and permeability for water vapor or air. The customer wants highly tolerable, breathable products, which are also characterized by very good skin and optimal release. On the other hand, the economic targets of medical products manufactures must be considered. Development in the area of UV-crosslinkable acrylic pressure-sensitive adhesives (PSA) for medical application describes the variety of acrylic composition, residue monomers content, quality control of peel adhesion level and repeating during the time, biocompatibility of the acrylic self-adhesive layers and their practical medical application. The new class of unsaturable copolymerizable photoinitiator, such as 4-acryloyloxy benzophenone was used for the synthesis of photoreactive UV-crosslinkable solvent-borne acrylic PSA. The properties of acrylic PSA were determined as well.