This study experimentally investigated the possibility of stable burning conditions of liquid fuel inside a narrow tube using an electrospray technique without external heating or a catalyst. The mixture of 30% volume ethanol and 70% volume n-heptane was used as a liquid fuel atomized by the electrospray method with single capillary-ring extractor-mesh collector electrode configuration placed inside a quartz glass tube with an inner diameter of 3.5 mm. A stable flame was established inside the narrow tube without wall wetting within a certain range of equivalence ratio for a fuel flow rate of 1 mL/h. This study confirmed that the role of the mesh as the collector was very important in establishing a stable flame inside the narrow tube. If the fuel flow rate was sufficiently large, wall wetting occurred and eventually stable burning stopped. (C) 2011 The Combustion Institute. Published by Elsevier Inc. All rights reserved.