In this work, composites from eucalyptus fiber (EF) and polyurethane emulsion (PU) were prepared. Ethyl cellosolve-blocked polyisocyanate (EC-bp) was used as a novel adhesive and the mechanical and water absorption properties of the prepared composites were analyzed. The results showed that the tensile, flexural, and water resistance properties of the composites modified by such adhesive were enhanced compared with those of unmodified ones. Effects of EC-bp on the thermal degradation and the morphology of the composites were also investigated and compared. The presence of modification on the surface of EC-bp treated EF/PU composites was identified by Fourier transform infrared spectroscopy (FTIR) from the appearance of CO bands absorbance and the reducing of relative intensity of OH. Thermo-gravimetric analysis (TGA) resulted that the thermal stability of the modified composites was improved. Environmental scanning electron microscopy (ESEM) was used to observe the morphology and evaluate the interfacial adhesion of the composites. The results showed that much better homogeneity morphology of the modified composites was achieved, which indicated that the prepared EC-bp as an adhesive could improve the interfacial adhesion. These findings appeared that the occurrence of strong bonds between the composite components in the presence of EC-bp, rather than the unique existence of Van der Waals interactions among the nonpolar structures or the hydrogen bonding interaction. (c) 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012