Maleic anhydride (MAH) was grafted onto ethylene vinyl acetate copolymer (EVA) in the internal mixer in the presence of dicumyl peroxide (DCP), and a prepared reactive compatibilizer, MAH-g-EVA, was blended with Poly (ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate) (PETG). The gel content determination and element analysis (EA) was performed to confirm the grafting reaction. It was found that grafting reaction of MAH on to EVA could compete with crosslinking reaction of DCP during the modification process. In addition, the introduction of small amount of MAH showed a great effect on reducing gel content by decreasing crosslink reaction. As MAH content increased, grafted MAH concentration increased, whereas the grafting yield decreased. It was also confirmed that MAH-g-EVA acted as a reactive compatibilizer in the blend with PETG, and enhanced compatibility by reacting with the hydroxyl end groups, OH, of PETG. Addition of EVA in the blend leads a plastic deformation of PETG, and MAH had a great effect on enhancing interfacial adhesion resulting in significant increasing of % strain; however, improved compatibility could not be changed much in low strain tensile strength and Young's modulus. (C) 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012