Bioresource Technology, Vol.102, No.10, 5709-5716, 2011
Evaluation of performance and microbial community in a two-stage UASB reactor pretreating acrylic fiber manufacturing wastewater
A two-stage UASB reactor was employed to pretreat acrylic fiber manufacturing wastewater. Mesophilic operation (35 +/- 0.5 degrees C) was performed with hydraulic retention time (HRT) varied between 28 and 40 h. Mixed liquor suspended solids (MLSS) in the reactor was maintained about 8000 mg/L. The results showed COD and sulfate removal could be kept at 51% and 75%, respectively, when the HRT was no less than 38 h. Sulfate reduction mainly occurred in the acidification-stage reactor while methane production mainly occurred in the methane-stage reactor. The size of granule formed in the acidification-stage reactor ranged between 1 and 5 mm while the largest size of granule in the methane-stage reactor ranged from 0.5 to 2 mm. Compared to microbial populations in the acidification-stage reactor, the microbial diversity in methane-stage reactor was more abundant. In the acidification-stage reactor, the Syntrophobacter sulfatireducens devoted to both sulfate reduction and acetate production. (C) 2011 Elsevier Ltd. All rights reserved.
Keywords:Acrylic fiber manufacturing wastewater;A two-stage UASB reactor;Sulfidogenesis;Methanogenesis;Granule