Dissolved lignocelluloses from the pre-hydrolysis liquor (PHL) of kraft-based dissolving pulp production process were recovered by adsorption to lime mud produced in the causticizing plant of the kraft process. The adsorption of lignocelluloses was a fast process, and could be completed within one hour. The addition of polydiallyldimethylammonium chloride (PDADMAC) significantly increased the amounts of adsorbed lignin and hemicelluloses, which more than doubled at the PDADMAC dosage of 0.1% (based on the weight of PHL). The measured heating values of the adsorbed lignocelluloses indicate that adsorption of lignocelluloses to lime mud may result in the energy saving of the lime kiln. The process proposed in this study could also be adapted to decrease inhibitor concentrations (lignin and acetic acid) if the dissolved hemicelluloses in the PHL were used to produce value-added products, e.g., ethanol, xylitol, based on the fermentation process. (C) 2011 Elsevier Ltd. All rights reserved.