The performance of two-part, amidoamine-cured epoxy adhesives on clean and oil-contaminated electrogalvanized steel(EGS) was studied using screening and lap shear tests. On exposure to boiling water, the cured epoxy adhesives with amidoamines having higher amine value delaminated from the clean and oil-contaminated EGS surfaces before those cured with amidoamines having low amine value. The results of X-ray photoelectron spectroscopy (XPS) showed that the adhesives cured with amidoamines having high amine value were unable to displace the oil from the EGS substrate. However, the durability and the strength of the adhesive bonds on the oiled EGS could be improved by adding proper amounts of silane or wetting agent to the adhesive. The preferential adsorption of amino curing agents occurred on the clean EGS surface, confirmed by XPS and reflection absorption infrared spectroscopy, and this decreased the durability of the bonds in boiling water. In addition, from XPS analyses of various specimens, different amounts of cured resins were detected in the adhesive/EGS interfacial regions which affecting the durability of the adhesive bonds. In addition, the amidoamine curing agents may form complexes on the EGS surface.