화학공학소재연구정보센터
Journal of Adhesion, Vol.50, No.2, 165-180, 1995
Optimal design of the adhesively-bonded tubular single lap joint
In this paper, a method for the optimal design of the adhesively-bonded tubular single lap joint was proposed based on the failure model of the adhesively-bonded tubular single lap joint. The failure model incorporated the nonlinear mechanical behavior of the adhesive as well as the different failure modes in which the adhesive failure mode changed from bulk shear failure, via transient failure, to interfacial failure between the adhesive and the adherend, according to the magnitudes of the residual thermal stresses induced by fabrication. The effects of the design parameters for the adhesively-bonded tubular single lap joint, such as the thicknesses of adhesive layer and adherends, the bonding length, and the scarfs of adherends, on the torque transmission capability and the efficiency of the adhesive joint were investigated.