This work presents the results of experiments conducted to determine the mass loss characteristics of a cylindrical wood particle undergoing devolatilization under oxidation conditions in a bubbling fluidized bed combustor. Cylindrical wood particles having five different sizes ranging from 10 to 30 mm and aspect ratio (l/d = 1) have been used for the study. Experiments were conducted in a lab scale bubbling fluidized bed combustor having silica sand as the inert bed material and air as the fluidizing medium. Total devolatilization time and mass of wood/char at different stages of devolatilization have been measured. Studies have been carried out at three different bed temperatures (T(bed) = 750, 850 and 950 degrees C), two inert bed material sizes (mean size d(p) = 375 and 550 mu m) and two fluidizing velocities (u = 5u(mf) and u = 10u(mf)). Devolatilization time is most influenced by the initial wood size and bed temperature. Most of the mass is lost during the first half of the devolatilization process. There was no clear influence of the fluidization velocity and bed particle size on the various parameters studied. The apparent kinetics estimated from the measured mass history show that the activation energy varied narrowly between 15 and 27 kJ/mol and the pre-exponential factor from 0.11 and 0.45 s(-1) for the wood sizes considered. (C) 2009 Elsevier Ltd. All rights reserved.