The methyl esters of fatty acids (biodiesel) obtained via transesterification of vegetable oils or animal fats are an alternative to current fossil fuels. A large amount of glycerol as a by-product is generated in this process and new applications for this surplus need to be found. Thus, the transformation of glycerol into branched oxygen-containing compounds could be an interesting solution to provide an outlet for increasing glycerol stocks. In this work, several oxygenated compounds, obtained by transformation of glycerol via etherification, esterification and acetalisation, have been assessed as components for biodiesel formulation. Different quality parameters have been evaluated following the procedures listed in the EN 14214 European Standard for biodiesel specifications. These parameters have been correlated with the amount and chemical nature of oxygenated derivate present in the biodiesel. The best performance as component for biodiesel formulation has been achieved by the mixture of ethers produced via etherification of glycerol with isobutylene. The addition of these compounds has not only improved the low-temperature properties of biodiesel (i.e. pour point and cold filter plugging point) and viscosity, but also did not impair other important biodiesel quality parameters analyzed. Although most of the studied oxygenated derivates do not significantly improve any biodiesel property, they do not exert a significant negative effect either. Furthermore, all of them allow an enhancement of overall yield in the biodiesel production. Nevertheless, further improvement could be addressed with a better purification to reduce the presence of non-desired impurities such as di-isobutylenes and unreacted acetic acid, which have a negative influence especially in acid number and oxidation stability. (C) 2010 Elsevier Ltd. All rights reserved.