The partitioning of trace elements and the influence of the feed conditions (50: 50 coal/pet-coke feed blend and limestone addition) was investigated in this study. To this end feed fuel, fly ash and slag samples were collected under different operational conditions at the 335 MW Puertollano IGCC power plant (Spain) and subsequently analysed. The partitioning of elements in this IGCC plant may be summarised as follows: (a) high volatile elements (70->99% in gas phase): Hg, Br, I, Cl and S; (b) moderately volatile elements (up to 40% in gas phase and >= 60% in fly ash): As, Sb, Se, B, F, Cd, Tl, Zn and Sn; (c) elements with high condensation potential: (>90% in fly ash): Pb, Ge, Ga and Bi; (d) elements enriched similarly in fly ash and slag 30-60% in fly ash: Cu, W, (P), Mo, Ni and Na; and (e) low volatile elements (>70% in slag): Cs, Rb, Co, K, Cr, V, Nb, Be, Hf, Ta, Fe, U, Ti, Al, Si, Y, Sr, Th, Zr, Mg, Ba, Mn, REEs, Ca and Li. The volatility of As, Sb, and Tl and the slagging of S, B, Cl, Cd and low volatile elements are highly influenced by the fuel geochemistry and limestone dosages, respectively. (C) 2010 Elsevier Ltd. All rights reserved.