Fuel, Vol.90, No.10, 3021-3027, 2011
On-site low-pressure diesel HDS for fuel cell applications: Deepening the sulfur content to <= 1 ppm
This work investigates the feasibility of ultra-deep hydrodesulfurization (i.e. <= 1 ppm of sulfur content) of several diesel feedstocks, viz., regular (R), premium (P) and hydrotreated straight-run (HSR) at low pressures, i.e. 10 bar, to lower significantly the operation costs. The premium and regular diesel contain additive packages with several components such as cetane boosters, antioxidants that show to negatively affect the sulfur conversion at low pressures. In the hydrotreated straight-run diesel fuel, which does not contain an additive package, total desulfurization can be obtained at 10 bar, T = 340 degrees C and LHSV = 1 h(-1). As a model for the additive package, FAME (fatty acid methyl ester), an ingredient that encounters the demands of a sustainable future, was added to the hydrotreated straight-run diesel (HSR + FAME) in order to check its influence on the total sulfur conversion. Results show that this biofuel component hindered tremendously the sulfur removal process by lowering the sulfur removal from 98% to zero at 10 bar, probably by competitive adsorption. At higher pressures, e.g. 30 bar, when FAME was present, new sulfur compounds were formed during the HDS process and the effective sulfur removal was very low. (c) 2011 Elsevier Ltd. All rights reserved.