| 학회 |
한국고분자학회 |
| 학술대회 |
2014년 봄 (04/10 ~ 04/11, 대전 컨벤션센터) |
| 권호 |
39권 1호 |
| 발표분야 |
고분자구조 및 물성 |
| 제목 |
An Improved Manufacturing Mehtod of P-DCPD Resin using Molybdenum Type Catalyst in Air Condition |
| 초록 |
Ring-opening metathesis polymerization of p-DCPD can be performed using the molybdenum type catalyst. This reaction usually progresses in nitrogen condition, because the catalysts are extremely sensitive in air condition. To solve this problem, DCPD resin was cured using hot press after stirring of DCPD A and B liquid in air condition. The mechanical properties of DCPD were improved by using hot press method. It might be because hot press method could provide sufficient press on DCDP specimen. Poisoning of catalyst was not effective for the curing of resin in a short time. During polymerizing, pressure and temperature had a great influence on the mechanical properties of DCPD. Acknowledgement: This work was supported from Civil Military Technology development Project, by Civil Military Technology Cooperation Center, 2013-2014. |
| 저자 |
최진영1, 왕작가1, 권동준1, 신평수1, 하중찬2, 정규상2, 박종만1
|
| 소속 |
1경상대, 2(주)도하인더스트리 |
| 키워드 |
p-DCPD; hot press molding; mechanical property
|
| E-Mail |
|
