| 학회 |
한국고분자학회 |
| 학술대회 |
2017년 봄 (04/05 ~ 04/07, 대전컨벤션센터) |
| 권호 |
42권 1호 |
| 발표분야 |
분자전자 부문위원회 I |
| 제목 |
One-Step Interface Engineering for All Inkjet-Printed All Organic Components in Transparent, Flexible Transistors and Inverters |
| 초록 |
A one-step interface engineering is used on both polymer electrodes and gate dielectric for all-inkjet-printed, flexible, transparent OTFTs and inverters. Dimethylchlorosilane-terminated polystyrene (PS) is introduced as a surface modifier to cured PVP dielectric and PEDOT:PSS electrodes without any pretreatment. On the benefit of the PS interlayer, the electrical properties of the TIPS-pentacene based OTFTs on a flexible plastic substrate are significantly improved, as shown by a field-effect mobility of 0.27 cm2V-1s-1. In contrast, the untreated system shows a low mobility of less than 0.02 cm2V-1s-1. Additionally, the all-inkjet-printed PS-treated inverters exhibit a voltage gain of 7.17 VV-1. The TFTs and inverters, including deformable and transparent PEDOT:PSS electrodes, exhibit a light transmittance of higher than 70%. Specifically, there is no significant degradation in the electrical performance of the interface engineered system after 1000 bending cycles at a radius of 5 mm. |
| 저자 |
배명원1, 하제욱2, 정승준2, 조길원3, 홍용택2, 양회창1
|
| 소속 |
1인하대, 2서울대, 3포항공과대 |
| 키워드 |
interface engineering; inkjet printing; polymer binding; transparent thin film transistors; polymer electrodes
|
| E-Mail |
|
