| 초록 |
The Ti-loaded meso porous support in photocatalysis offered: 1) formation of ultra fine titania particles during sol-gel deposition; 2) increased adsorption especially for non-polar compounds; 3) higher acidity which enhances electron abstraction; and 4) less UV-light scattering, since silica is the main component of zeolite. The combination of the effect of zeolites and TiO2 in photocatalytic destruction of aromatic compound in aqueous system was studied. However, the advantage of using regular structure like zeolite in the gaseous system was not clearly identified. In addition, as a loading method for Ti on support, the impregnation was almost used in other studies and the loading amounts were also very small. In this study, 10 mol% Al-W-incorporated mesoporous titano (15 mol %) silicates was prepared. Its adsorption ability and photocatalytic decomposition for macromolecules was expected to be similar to that of toluene. Acknowledgement: This work was supported by Yeungnam University (No.206-A-054-027). The authors are very grateful to it. |
