| 학회 |
한국고분자학회 |
| 학술대회 |
2017년 봄 (04/05 ~ 04/07, 대전컨벤션센터) |
| 권호 |
42권 1호 |
| 발표분야 |
고분자가공/복합재료 |
| 제목 |
3D 전기저항 맵핑을 통한 탄소섬유 복합재료의 손상감지 |
| 초록 |
Carbon Fiber Reinforced Composites (CFRC) were manufactured using two different resins, epoxy and unsaturated polyester (UPE), by a vacuum assisted resin transfer molding (VARTM) process. The permeability was measured for two composites with the same fiber volume fraction but different viscosities. The interfacial properties of the CFRC, manufactured using tow different resins, were evaluated via the interlinear shear strength (ILSS) test and contact angle measurements. Three dimensional electrical resistance (3D ER) mapping was used to detect damage area caused by the drilling of holes in the CFRC. Typically such drilling results in damage such as delamination, for which the location and extent of damage area was determined using 3D ER mapping. Acknowledgement: This work (No.C0397829) was supported by Business for Cooperative R&D between Industry, Academy, and Research Institute funded Korea Small and Medium Business Administration in 2016. |
| 저자 |
김종현1, 박하승1, 백영민1, 신평수1, 권동준1, 성수환2, 박종만1
|
| 소속 |
1경상대, 2송월테크놀로지(주) |
| 키워드 |
VARTM; Permeability; Interfacial properties; 3D ER mapping
|
| E-Mail |
|
