| 초록 |
The acrylonitrile-butadiene-styrene (ABS)/polylactic acid (PLA) blends, ranged 10, 20, 30 and 40 wt% of PLA content, were prepared by mixing of the materials with a twin-screw extruder. To investigate the effects of compatibilizers on the mechanical and morphological properties of the ABS/PLA blends, compatibilizer was added in the range of 1.0 to 7.0 wt%. The mechanical and morphological properties of the ABS/PLA blends were investigated by Izod impact tester, UTM and SEM. Maximum impact and tensile strengths were appeared with the compatibilzer type II. Acknowledgements. This research was supported by a grant from Korea Institute of Energy and Resources Technology Evaluation and Planning by the Ministry of Knowledge Economy of Korean government. Also, this study was supported by a Korea University Grant. |
