| 학회 | 한국재료학회 |
| 학술대회 | 2010년 봄 (05/13 ~ 05/14, 삼척 팰리스 호텔) |
| 권호 | 16권 1호 |
| 발표분야 | B. Nanomaterials Technology (나노소재기술) |
| 제목 | Methodology to Analyze Failure Mechanisms on RF-MEMS Switch Using Nano-Indenter |
| 초록 | Radio-Frequency (RF) Microelectromechanical system (MEMS) switches have become the promising devices due to their advantages such as higher off-impedance, lower insertion loss, and low power consumption. However, RF-MEMS switches have not been in commercialization to date due to the reliability problems such as increasing in electrical contact resistance and stiction of the switch electrode. In order to improve their reliability problems, it is necessary to understand the micro-contact failure in electrical switching. A nano-indenter was modified to simulate DC switching of RF MEMS switches and to investigate the micro contact reliability. The contact reliability of thin Au film contacts was characterized; electric contact between both Au coated ball tip and Si wafer was permanently shorted out after certain switching cycles. The surface of contact area was deformed by melting and mass transfer and it causes contact area decreasing and breaking electrical contacts. There was some fluctuation on penetration depth change curve of the switching cycles before the electrical failure and this result implies the change in depth curve seems to be an indicator of failure broken. |
| 저자 | Dong Seok Kim1, Seung Deok Ko2, Byung Kee Lee3, Jun Bo Yoon2, Do Kyung Kim3 |
| 소속 | 1Department of Materials Science and Engineering, 2KAIST, 3Department of Electrical Engineering |
| 키워드 | RF-MEMS Switch; Contact Reliability; Nano-Indenter |
