| 학회 |
한국화학공학회 |
| 학술대회 |
2004년 봄 (04/23 ~ 04/24, 공주대학교) |
| 권호 |
10권 1호, p.309 |
| 발표분야 |
분리기술 |
| 제목 |
The stainless steel fiber recycle from grinding swarf by using supercritical fluids |
| 초록 |
Supercritical fluids extraction has gained widely acceptance as the method for removal. It has many advantages of low waste production, rapid extraction, and enhanced extraction efficiency for waste removal. The recovery of stainless steel fiber by removing cutting oil from grinding swarf, which is classified as specified wastes, was investigated. The experiments for removing cutting oil from swarf were performed with supercritical CO2 at 30-50°C and 10-30MPa, as well as sub- and supercritical propane at 80-110°C and 5-20MPa. In addition, the characteristics of stainless steel fiber from swarf treated with sub- and supercritical fluids were compared with those treated vacuum thermal extraction. The extraction efficiency of cutting oil using supercritical propane was several times higher than that of supercritical CO2. By using supercritical fluids as a solvent, we could not only remove cutting oil from raw swarf effectively, but also preserve the stainless steel fiber's own characteristics. |
| 저자 |
양준열1, 김용호2, 이창하1, 이윤우3, 임종성2
|
| 소속 |
1연세대, 2한국과학기술(연), 3서울대 |
| 키워드 |
stainless steel; fiber; swarf; supercritical; fluid
|
| E-Mail |
|
| 원문파일 |
초록 보기 |
