| 학회 |
한국고분자학회 |
| 학술대회 |
2009년 봄 (04/09 ~ 04/10, 대전컨벤션센터) |
| 권호 |
34권 1호 |
| 발표분야 |
기능성 고분자 |
| 제목 |
Surface Modification of Polymers by Ar Ion Beam |
| 초록 |
The properties of low weight, high flexibility and good processability make polymer materials a viable substitute for metal and glass in many applications such as automobile electronics and telecommunications. Among these materials, PC/ABS is very important plastic for interior and exterior parts in the automobile application. PC/ABS blends combine the benefits of both PC and ABS in one material. They exhibit a unique set of performances including high flow, toughness and heat resistance. For the exterior part of automobile, PC/ABS is used as a polymer substrate of chrome plating for car emblems and automotive badges. In general process of metal plating, the plastic should be etched on the surface for anchoring effect between polymer substrate and metal surface. The etching process on the surface is performed using very strong acids such as chromic acid and sulfuric acid which can be a cause of environmental problems and need a lot of money for treatment. In the present study we have modified and etched the PC/ABS surface by argon ion beam treatment using hybrid ion beam system. All the PC/ABS samples were treated using a 1 KV anode voltage with different time ranged from 5-50 min. Ar gas ion was introduced into the ion gun to obtain Ar ion. The distance between the ion source and substrate holder was about 15 cm. A radio frequency (RF) bias voltage ( 600 V) was applied to the substrate holder. |
| 저자 |
장용준1, 박봉현1, 이성훈1, Sk. Faruque Ahmed2, 이진우2, 문명운2, 이광렬2
|
| 소속 |
1현대자동차 선행개발센터, 2한국과학기술원 미래융합기술(연) |
| 키워드 |
Ion Beam; Polymers; Surface modification
|
| E-Mail |
|
