| 학회 |
한국고분자학회 |
| 학술대회 |
2007년 가을 (10/11 ~ 10/12, 일산킨텍스) |
| 권호 |
32권 2호 |
| 발표분야 |
전지기술과 고분자재료 |
| 제목 |
Performance of solid alkaline fuel cells using non-precious catalysts |
| 초록 |
Solid alkaline fuel cells are operable with solid alkaline electrolytes and non-precious catalysts. In this study, several commercially available anion-exchange membranes and non-precious electrocatalysts were used to fabricate MEAs for solid alkaline fuel cells. NeoseptaTM anion-exchange membranes (ASTOM, Japan) with different physical and electrochemical properties were investigated. Ni-based electrocatalysts and commercially available Ag/C (E-Tek, USA) with different loading amounts were employed. The catalyst slurries were prepared by mixing the catalyst powder (i.e., Ni/C and Pt/C for the anode and Ag/C and Pt/C for the cathode), deionized water and the ionomer binder produced by the same polymer to the polymeric electrolyte (5%) in DMF or DMAc. PTFE-impregnated Toray 250 carbon paper (waterproof by 8% PTFE) was used and sandwiched the membranes. Fabricated MEAs were characterized and evaluated at H2/air, 50~100% RH, 60~80 oC and ambient pressure. |
| 저자 |
박진수1, 박구곤2, 임성대3, 양태현1, 김창수2, 이원용3
|
| 소속 |
1한국에너지기술(연), 2수소-연료전지 연구본부, 3고분자연료전지연구단 |
| 키워드 |
Solid alkaline fuel cell; Non-precious catalyst; Anion-exchange membrane; Membrane-electrode assembly; Catalyst slurry
|
| E-Mail |
|
