| 학회 |
한국화학공학회 |
| 학술대회 |
2009년 가을 (10/22 ~ 10/23, 일산 KINTEX) |
| 권호 |
15권 2호, p.1775 |
| 발표분야 |
에너지 |
| 제목 |
Fabrication of an Anode-Side, Substrate-Supported, Planar-Type SOFC |
| 초록 |
The porous 3YSZ support has a suitable mechanical strength with max load of 0.8 kgf.cm-2 and a proper pore distribution 43% of porosity and 10 m of pore size, which allows sufficient fuel gas flows through the support to reaction sites for the efficient electrical reactions. Low electrical conductivity of the highly porous support brings to selective-area subsequent coatings of thin anode (NiO-YSZ), electrolyte (8YSZ) and cathode (LSM) layers for easily positioning current collectors at both anode and cathode electrodes as well as gas-sealing the cathode compartment for the dual-chamber mode. Using spin coating and simple, cheap but very effective masking method, three thin layers of the anode, electrolyte and cathode were deposited successfully onto the selective areas of the previous base surface. Appropriate sintering profiles of each components resulted in highly porous components (support, anode and cathode) and relatively dense electrolyte layer.The cell exhibited very low nitrogen permeability at room temperature and no short-circuit even at 900°C. |
| 저자 |
Nguyen Xuan Phuong Vo1, Quang Nhu Ho2, 윤성필2, 남석우2
|
| 소속 |
1Korea Institute of Science and Technology (KIST) / Korea Univ. of Science and Technology (UST), 2Korea Institute of Science and Technology (KIST) |
| 키워드 |
SOFC |
| E-Mail |
|
| 원문파일 |
초록 보기 |
