| 학회 |
한국고분자학회 |
| 학술대회 |
2015년 봄 (04/08 ~ 04/10, 대전컨벤션센터) |
| 권호 |
40권 1호 |
| 발표분야 |
고분자가공/복합재료 |
| 제목 |
Comparison of Physical and Mechanical Properties of p-DCPD for 3 Different Catalysts |
| 초록 |
p-DCPD resin is typically high impact strength polymer and applied for heavy construct and agricultural truck body. In this work the effect and the optimum condition of catalyst were investigated. Each DCPD with 3 catalysts showed different properties. DCPD with W showed high impact strength but lower tensile and flexure strengths, whereas DCPD with Mo showed higher tensile and flexure strength but lower impact strength. On the other hand, DCPD with Ru showed similar trend as epoxy and easy processibility under open system unlike close system for W and Mo cases. Total mechanical properties showed rather lower than DCPD with W or Mo. Acknowledgement: This work was supported from Civil Military Technology development Project, by Civil Military Technology Cooperation Center, 2013-2016. |
| 저자 |
최진영1, 왕작가1, 권동준1, 신평수1, 정규상2, 하중찬2, 박종만1
|
| 소속 |
1경상대, 2(주)도하인더스트리 |
| 키워드 |
p-DCPD; catalyst; ring-opening; impact strength
|
| E-Mail |
|
