| 학회 |
한국재료학회 |
| 학술대회 |
2011년 봄 (05/26 ~ 05/27, 제주 휘닉스 아일랜드) |
| 권호 |
17권 1호 |
| 발표분야 |
F. Display and optic Materials and processing(디스플레이 및 광 재료) |
| 제목 |
수성 고분자 - 탄소나노튜브 복합 분산 용액을 이용한 전계 방출 소자의 제작 |
| 초록 |
A polymer-based multi-walled carbon nanotube (MWCNT) field emission device was fabricated from a composite dispersion of MWCNTs and waterborne polymethyl methacrylate (PMMA). The waterborne PMMA synthesized through the emulsion polymerization method was added to minimize the reagglomeration of dispersed MWCNTs with surfactants in water, and increase the adhesion between the and the substrate. The field emission properties of the fabricated device were optimized by adjusting the density of the emitter and the adhesion between the MWCNTs and the substrate. These were done by controlling the polymer concentration added to the MWCNT dispersion, as well as the amount of spray coating on the substrate. The results confirm the successful fabrication of a polymer-based MWCNT field emission device with a low field of 1.07 V/μm and a good electric field enhancement factor of 2445. The device was fabricated by adding 0.8 mg/mL of polymer solution to the MWCNT dispersion and applying 20 cycles of spray coating. Application of this same MWCNT/polymer composite solution to a flexible polymer substrate also resulted in the successful fabrication of an electric field emission device with uniform emission and long time stability. |
| 저자 |
정혁, 김도진
|
| 소속 |
충남대 |
| 키워드 |
탄소나노튜브; 수성고분자; 전계방출소자
|
| E-Mail |
|
