| 학회 |
한국고분자학회 |
| 학술대회 |
2007년 가을 (10/11 ~ 10/12, 일산킨텍스) |
| 권호 |
32권 2호 |
| 발표분야 |
기능성 고분자 |
| 제목 |
Manufacturing and investigating the tube type actuator for electrochemical device |
| 초록 |
In this study, we could make the tube type actuator to have a great potential for active catheter, actuator and sensor. The hollow type polymer was fabricated by stacking both nafion films and a wire steel, which located in the inner center, with a heat-compression method and followed by removing the steel. The metal electrode was deposited by electroless plating on the surface of the polymer to make a actuator. The ultimate purpose of our study is the performance enhancement of the actuator having the improved bending deformation and stiffness by modulating the various factors such as film thickness, wire steel thickness and electrode conditions. The membrane properties of stacked nafion films and micro actuators were analyzed and characterized by EDS and FE-SEM. Displacement, initial bending deformation rate and maximum load were measured using a displacement measuring system. |
| 저자 |
왕혁식, 이장열, 윤벼리, 최영은, 황리라, 조재영
|
| 소속 |
서울대 |
| 키워드 |
IPMC; actuator; catheter
|
| E-Mail |
|
