| 학회 | 한국고분자학회 |
| 학술대회 | 2004년 가을 (10/08 ~ 10/09, 경북대학교) |
| 권호 | 29권 2호, p.236 |
| 발표분야 | 고분자 가공/블렌드 |
| 제목 | Electrospinning of Heat Resistant Polymer Fibers |
| 초록 | Since 1934, the electrospinning has been used as a method producing polymer fibers a few microns. Recently, major advancements have successfully reduced the fiber diameter to the range of tens of nanometers. With these advancements, many industries have begun to take note of the endless possibilities using these fibers, such as membranes, tissue skeleton, etc. Electrospun fibers are produced by the electrospinning process where a high voltage applied between a polymer solution and a ground plate. Currently, many studies on the optimization of electrospinning process have been addressed. The process can be controlled by varying the electrospinning parameters, such as polymer solution concentration, applied voltage and tip to collector distance. Poly (imides) were selected as a model polymer, in this work, due to its heat resistant nature. Analytical techniques including SEM, thermal analysis, FT-IR were used to characterize raw materials and the morphology of spun fibers. Acknowledgement This work was funded by the Center for Nanostructured Materials Technology of 21st Century Projects supported by the Ministry of Science and Technology, Korea. The authors gratefully acknowledge the financial support. |
| 저자 | 배정훈, 박현설 |
| 소속 | 한국에너지기술(연) |
| 키워드 | electrospinning; nano; fiber; heat resistant |
