| 학회 |
한국고분자학회 |
| 학술대회 |
2011년 봄 (04/07 ~ 04/08, 대전컨벤션센터) |
| 권호 |
36권 1호 |
| 발표분야 |
고분자 구조 및 물성 |
| 제목 |
Effect of epoxy on the morpholohy and properties of PET/PA6 blends |
| 초록 |
Poly(ethylene terephthalate)(PET) and Polyamide-6(PA6) are both semicrystalline polymers with commercial significance, but blends of PET and PA6 have been of minor importance due to the thermodynamic imcompatibility. In this study, the effect of an epoxy (unmodified Bisphenol-A type) was investigated as a reactive compatibilizer for the incompatible polymer blends of PET and PA6. The mixture of PET and PA6 with epoxy were melt compounded using twin extruder. The effect of epoxy on phase separation, thermal properties, melt viscosity, thermomechanical properties and reaction between epoxy and end groups of PET or PA6, were characterized using SEM, DSC, melt flow indexer and DMA, FT-IR respectively. It was found that epoxy plays as a compatibilizer role in the blend by controlling phase separation and increasing adhesion between the two components. This research was financially supported by the Ministry of Knowledge Economy through the Project of Industrial Source Technology. |
| 저자 |
조징1, 민병길1, 임목근2, 이광상2, 유영출2, 한재성3
|
| 소속 |
1금오공과대, 2로디아 폴리아마이드(주), 3한국섬유개발(연) |
| 키워드 |
PET; PA6; epoxy; blends; reactive compatibilizer
|
| E-Mail |
|
