| 학회 |
한국화학공학회 |
| 학술대회 |
2016년 봄 (04/27 ~ 04/29, 부산 BEXCO) |
| 권호 |
22권 1호, p.394 |
| 발표분야 |
분리기술 |
| 제목 |
Development of K2CO3-based dry sorbents using SnO2 and LiAlO2 for post-combustion CO2 capture |
| 초록 |
Gamma alumina (γ-Al2O3) is commonly used as a support or an additive material to design the ideal alkali metal-based sorbent. However, potassium-based sorbent using γ-Al2O3 was deactivated due to the formation of by-product such as KAl(CO3)(OH)2 during CO2 sorption. To overcome this problem, development of novel potassium-based sorbent is required using new supports or additive materials instead of γ-Al2O3. In this study, potassium-based dry sorbents using new supports or additive materials such as SnO2 and LiAlO2 were developed and investigated at a low temperature range between 60oC and 200oC. And the structure changes of the potassium-based sorbents were investigated by power X-ray diffraction. These sorbents show high CO2 capture capacities (89-94mg CO2/g sorbent). In addition, these high CO2 capture capacities are maintained during multiple cycles even at a low regeneration temperature of 200oC. |
| 저자 |
조민선1, 이수출1, 채호진1, 이중범2, 김재창1
|
| 소속 |
1경북대, 2한전 전력(연) |
| 키워드 |
흡수; 흡착; 온실가스 분리
|
| E-Mail |
|
| 원문파일 |
초록 보기 |
