| 1 |
Electrochemical oxidation of sour natural gas over La0.4Ce0.6O1.8-La0.4Sr0.6TiO3 +/-delta anode in SOFC: A mechanism study of H2S effects
Roushanafshar M, Yan N, Chuang KT, Luo JL
Applied Catalysis B: Environmental, 176, 627, 2015 |
| 2 |
Effect of liquid-phase properties on separation efficiency in a randomly packed distillation column
Bader AJ, Afacan A, Sharp D, Chuang KT
Canadian Journal of Chemical Engineering, 93(6), 1119, 2015 |
| 3 |
Carbon Deposition and Sulfur Tolerant La0.4Sr0.5Ba0.1TiO3-La0.4Ce0.6O1.8 Anode Catalysts for Solid Oxide Fuel Cells
Sun YF, Li JH, Cui SH, Chuang KT, Luo JL
Electrochimica Acta, 151, 81, 2015 |
| 4 |
Impregnation of La0.4Ce0.6O1.8-La0.4Sr0.6TiO3 as solid oxide fuel cell anode in H2S-containing fuels
Afshar MR, Yan N, Zahiri B, Mitlin D, Chuang KT, Luo JL
Journal of Power Sources, 274, 211, 2015 |
| 5 |
Electrochemical performance and carbon deposition resistance of Ce-doped La0.7Sr0.3Fe0.5Cr0.5O3-delta anode materials for solid oxide fuel cells fed with syngas
Sun YF, Li JH, Chuang KT, Luo JL
Journal of Power Sources, 274, 483, 2015 |
| 6 |
A-site deficient La0.2Sr0.7TiO3-delta anode material for proton conducting ethane fuel cell to cogenerate ethylene and electricity
Liu SB, Behnamian Y, Chuang KT, Liu QX, Luo JL
Journal of Power Sources, 298, 23, 2015 |
| 7 |
Effects of H2S and H2O on carbon deposition over La0.4Sr0.5Ba0.1TiO3/YSZ perovskite anodes in methane fueled SOFCs
Cui SH, Li JH, Jayakumar A, Luo JL, Chuang KT, Hill JM, Qiao LJ
Journal of Power Sources, 250, 134, 2014 |
| 8 |
Improved coking resistance of direct ethanol solid oxide fuel cells with a Ni-S-x anode
Yan N, Luo JL, Chuang KT
Journal of Power Sources, 250, 212, 2014 |
| 9 |
Insights into CO poisoning in high performance proton-conducting solid oxide fuel cells
Yan N, Fu XZ, Chuang KT, Luo JL
Journal of Power Sources, 254, 48, 2014 |
| 10 |
A low-temperature hydrogen production process based on H2S splitting cycle for sustainable oil sands bitumen upgrading
Wang H, Le Person A, Zhao X, Li J, Nuncio P, Yang LQ, Moniri A, Chuang KT
Fuel Processing Technology, 108, 55, 2013 |
