1 |
Effect of ethanol concentration in water coagulation bath on pore geometry of PVDF membrane for Membrane Gas Absorption application in CO2 removal Ahmad AL, Ramli WKW, Fernando WJN, Daud WRW Separation and Purification Technology, 88, 11, 2012 |
2 |
Separability of hydrogen from hydrogen-carbon dioxide mixture across silica-silicalite-1 film Othman MR, Tan SC, Bhatia S, Fernando WJN Fuel Processing Technology, 92(3), 428, 2011 |
3 |
Dependence of the effective diffusion coefficient of moisture with thickness and temperature in convective drying of sliced materials. A study on slices of banana, cassava and pumpkin Fernando WJN, Low HC, Ahmad AL Journal of Food Engineering, 102(4), 310, 2011 |
4 |
Experimental and modeling studies of particle removal in post silicon chemical mechanical planarization cleaning process Fernando WJN, Lok YH, Don MM, Madhaven V, Tay WS Thin Solid Films, 519(10), 3242, 2011 |
5 |
Hindered diffusion in lateral flow nitrocellulose membrane: Experimental and modeling studies Ahmad AL, Low SC, Shukor SRA, Fernando WJN, Ismail A Journal of Membrane Science, 357(1-2), 178, 2010 |
6 |
Solid heterogeneous catalysts for transesterification of triglycerides with methanol: A review Helwani Z, Othman MR, Aziz N, Kim J, Fernando WJN Applied Catalysis A: General, 363(1-2), 1, 2009 |
7 |
Continuous biosynthesis of biodiesel from waste cooking palm oil in a packed bed reactor: Optimization using response surface methodology (RSM) and mass transfer studies Halim SFA, Kamaruddin AH, Fernando WJN Bioresource Technology, 100(2), 710, 2009 |
8 |
Strategic planning on carbon capture from coal fired plants in Malaysia and Indonesia: A review Othman MR, Martunus, Zakaria R, Fernando WJN Energy Policy, 37(5), 1718, 2009 |
9 |
Technologies for production of biodiesel focusing on green catalytic techniques: A review Helwani Z, Othman MR, Aziz N, Fernando WJN, Kim J Fuel Processing Technology, 90(12), 1502, 2009 |
10 |
A model for constant temperature drying rates of case hardened slices of papaya and garlic Fernando WJN, Ahmad AL, Shukor SRA, Lok YH Journal of Food Engineering, 88(2), 229, 2008 |