In this work, we have developed a direct one-step process design on an oxygenate production, namely, dimethyl ether (DME). DME can be used as a cetane-number booster for diesel, in addition to being capable of a substitute for liquefied petroleum gas (LPG). In order to analyze the independent chemical reactions involved in the reactor, it is necessary to carry out a study of the chemical reaction stoichiometry. And with a specific syngas feed, the following reactions are found: (1) CO2 + H-2 = H2O + CO, (2) CO + 2H(2) = CH3OH, and (3) 3CO + 3H(2) = (CH3)(2)O + CO2. To gain an insight into the reactor design, we have also utilized the concept of thermodynamics, including equilibrium-constant method and the minimization of Gibbs free energy. Additionally, we have also united the pinch technology with the base-case design for heat exchanger network synthesis in order to compare the energy consumption and capital costs of the process with/without heat integration. Two kinds of software were used in the research-Aspen Plus and SuperTarget. The former was used for the process synthesis, design, and simulation; the latter was used to carry out the pinch analysis and the synthesis of heat exchanger network. (C) 2012 Elsevier Ltd. All rights reserved.