화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Chemical Engineering Research, Vol.47, No.2, 185-189, April, 2009
Export Citation
교반셀에서 측정한 아민첨가 암모니아수 흡수제의 이산화탄소 흡수 반응 속도 측정
Absorption Rate of Carbon Dioxide into Blended Ammonia Solution with Amine Additives in a Stirred Cell Reactor
박호석, 유정균, 홍원희†, 김종남1
  • 한국과학기술원 생명화학공학과, 305-701 대전시 유성구 구성동 373-1
  • 1한국에너지기술연구원, 305-343 대전시 유성구 장동 71-2
HoSeok Park, Jong Kyun You, Won Hi Hong†, and Jong Nam Kim1
  • Department of Chemical and Biomolecular Engineering, Kaist, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Korea
  • 1Chemical Research Center, Korea Institute Energy Research, 71-2 Jang-dong, Yuseong-gu, Daejeon 305-343, Korea
E-mail:
초록
10 wt% 암모니아수 흡수제에서 이산화탄소 흡수속도를 교반셀 반응기를 이용하여 293~337 K 범위에서 측정하였다. 암모니아 흡수제와 이산화탄소의 반응속도를 아레니우스 식으로 나타내었으며 활성화에너지는 50.42 kJ/mol였다. 2-Amino-2-methyl-1-propanol(AMP), 2-amino-2-methyl-1,3-propandiol(AMPD), 2-amino-2-ethyl-1,3-propandiol(AEPD)의 입체장애아민 첨가제가 1 wt% 함유된 흡수제에서의 이산화탄소 흡수속도를 측정하였다. 아민 첨가제들은 흡수속도에 영향을 주었으며 1 wt%의 AMP를 첨가한 경우 반응속도 상수는 약 53% 증가하였다.
Absorption rate of carbon dioxide into aqueous ammonia absorbent(10 wt%) was measured in the temperature range from 293 K to 337 K using a stirred-cell reactor. The reaction rate constant was correlated with the Arrehnius equation and the activation energy was 50.42 kJ/mol. CO2 absorption rate into modified ammonia absorbent was also investigated. For the modified ammonia absorbent, 1 wt% sterically hindered amines of 2-amino-2-methyl-1-propanol(AMP), 2-amino-2-methyl-1,3-propandiol(AMPD) and 2-amino-2-ethyl-1,3-propandiol(AEPD) were used as additives. The CO2 absorption rate increased by adding 1 wt% of the amine additive, in the case of AMP additive, the absorption rate enhanced by about 53%.
Keywords:CO2 Removal;Absorption;Ammonia;Kinetics;Blending
  1. Bai HL, Yeh AC, Ind. Eng. Chem. Res., 36(6), 2490 (1997)
  2. Li XN, Hagaman E, Tsouris C, Lee JW, Energy Fuels, 17(1), 69 (2003)
  3. Yeh AC, Bai H, The Science of the Total Environment, 228, 121 (1999)
  4. Diao YF, Zheng XY, He BS, Chen CH, Xu XC, Energy Conv. Manag., 45(13-14), 2283 (2004)
  5. Meng L, Burris S, Bui H, Pan WP, Anal. Chem., 77, 5947 (2005)
  6. You JK, Park HS, Hong WH, Park J, Kim JN, Korean Chem. Eng. Res., 45(3), 258 (2007)
  7. Andrew SPS, Chem. Eng. Sci., 3, 279 (1954)
  8. Kucka L, Richter J, Kenig EY, Gorak A, Sep. Purif. Technol., 31(2), 163 (2003)
  9. You JK, Park HS, Yang SH, Hong WH, Kang JK, Yi KB, Kim JN, J. Phys. Chem. B, 112, 4323 (2008)
  10. Middleman S, “An Introduction to Mass and Heat Transfer,” Principles of Analysis and Design, Wiley (1997)
  11. Krevelen DWV, Hoftijzer PJ, Huntjens FJ, Rec. Trav. Chim. Pays-bas, 68, 191 (1949)
  12. Danckwerts PV, Gas-liquid Reactions; McGraw-Hill, New York (1970)
  13. Pinsent BRW, Pearson L, Roughton FWJ, Trans. Faraday. Soc., 52, 1512 (1956)
  14. Hikita H, Asai S, Ishikawa H, Honda M, Chem. Eng. J., 13, 7 (1977)
  15. Pani F, Gaunand A, Cadours R, Bouallou C, Richon D, J. Chem. Eng. Data, 42(2), 353 (1997)
  16. Xu S, Wang YW, Otto FD, Mather AE, Chem. Eng. Sci., 51(6), 841 (1996)