Korean Chemical Engineering Research, Vol.50, No.3, 562-566, June, 2012
세그먼트 관형 SOFC의 제작 및 특성 평가
Fabrication and Property Evaluation of Tubular Segmented-in-Series Solid Oxide Fuel Cell (SOFC)
E-mail:
초록
본 논문에서는 세그먼트 관형 고체산화물 연료전지(SOFC)의 설계 및 제작과 특성 분석을 다루고 있다. 관형 세라믹 지지체는 압출 공정을 통하여 제작하였으며, NiO-YSZ 연료극과 YSZ 전해질은 담금 코팅법을 통해 세라믹 지지체에 코팅하였다. 코팅된 세라믹 지지체를 1,350 ℃에서 5시간 동안 열처리하였으며, 10 μm 미만의 치밀하고, 균열이 없는 YSZ 전해질 층을 얻을 수 있었다. 또한 열처리된 세라믹 지지체에 LSM-YSZ/LSM/LSCF로 구성된 다층 구조 공기극을 담금법으로 코팅하여 1,150 ℃에서 열처리하였다. 세라믹 관형 지지체에 코팅된 세그먼트 SOFC 셀은 Ag-glass 연결재를 사용하여 전기적으로 직렬 연결하였으며, 수소연료 유량과 운전 온도에 따른 세그먼트 SOFC의 성능 변화를 측정하였다.
A novel design of tubular segmented-in-series(SIS) solid oxide fuel cell (SOFC) sub module was presented in this paper. The tubular ceramic support was fabricated by the extrusion technique. The NiO-YSZ anode and the yttria-stabilized zirconia (YSZ) electrolyte were deposited onto the ceramic support by dip coating method. After sintering at 1350 ℃ for 5 h, a dense and crack-free YSZ film was successfully fabricated. Also, the multi-layered cathode composed of LSM-YSZ composite, LSM and LSCF were coated onto the sintered ceramic support by dip coating method and sintered at 1150 ℃. The performance of the tubular SIS SOFC cell and sub module electrically connected by the Ag-glass interconnect was measured and analysed with different fuel flow and operating temperature.
- Tompsett GA, Finnerty C, Kendall K, Alston T, Sammes NM, J. Power Sources., 86, 376 (2000)
- Singhal SC, Solid State Ion., 152, 405 (2002)
- Wang JM, Lu Z, Huang XQ, Chen KF, Ai N, Hu JY, Su WH, J. Power Sources, 163(2), 957 (2007)
- Sammes NM, Du Y, Bove R, J. Power Sources, 145(2), 428 (2005)
- Gardner FJ, Day MJ, Brandon NP, Pashley MN, Cassidy M, J. Power Sources, 86(1-2), 122 (2000)
- Costamagna P, Selimovic A, Del Borghi M, Agnew G, Chem. Eng. J., 102(1), 61 (2004)
- Lai TS, Barnett SA, J. Power Sources, 147(1-2), 85 (2005)
- Yun UJ, Lee JW, Lee SB, Lim TH, Park SJ, Song RH, Han KS, Korean Hydrogen and New Energy Society., 21, 214 (2010)
- Lee DS, Lee JH, Kim J, Lee HW, Song HS, Solid State Ion., 166(1-2), 13 (2004)
- Wanzenberg E, Tietz F, Kek D, Panjan P, Stover D, Solid State Ion., 164(3-4), 121 (2003)
- Serincan MF, Pasaogullari U, Sammes NM, J. Power Sources, 192(2), 414 (2009)
- Ding J, Liu J, J. Power Sources, 193(2), 769 (2009)