| 1 |
Mimicking layer inversion in solid-liquid fluidized beds in narrow tubes
Cunez FD, Franklin EM
Powder Technology, 364, 994, 2020 |
| 2 |
Experimental and numerical investigations on the particle behaviours in a bubbling fluidized bed with binary solids
Wang TY, Tang TQ, Gao QH, Yuan ZG, He YR
Powder Technology, 362, 436, 2020 |
| 3 |
LIQUID VELOCITY INTERVAL FOR MINIMUM LIQUID FLUIDIZATION OF BINARY SOLIDS MIXTURES
Vinnenberg S, Ellis N, Bi XT, Epstein N
Canadian Journal of Chemical Engineering, 95(5), 985, 2017 |
| 4 |
Hydrodynamic characteristics at the layer inversion point in three-phase fluidized beds with binary solids
Kim JY, Bae JW, Grace JR, Epstein N, Lee DH
Chemical Engineering Science, 157, 99, 2017 |
| 5 |
Horizontal immersed heater-to-bed heat transfer with layer inversion in gas-liquid-solid fluidized beds of binary solids
Kim JY, Bae JW, Grace JR, Epstein N, Lee DH
Chemical Engineering Science, 170, 501, 2017 |
| 6 |
Drying characteristics of fine powders in an inert medium circulating fluidized bed with binary inert media
Kang DH, Kim SI, Chun WP, Lee DH
Journal of Industrial and Engineering Chemistry, 45, 266, 2017 |
| 7 |
Data and models for liquid velocity and liquid holdup at layer inversion point in a three-phase fluidized bed of binary solids
Rim GH, Kim JY, Lee DH, Grace JR, Epstein N
Chemical Engineering Science, 109, 82, 2014 |
| 8 |
Flow characteristics and axial bed composition according to mass ratio of binary solids in gas-solid circulating fluidised beds
Kim DY, Rim GH, Lee DH
Powder Technology, 258, 344, 2014 |
| 9 |
Prediction of layer inversion velocity in three-phase fluidized beds
Rim G, Jeong C, Bae J, Lee Y, Lee DH, Epstein N, Grace JR, Kim SD
Chemical Engineering Science, 100, 91, 2013 |
| 10 |
Characterization of fluidized bed layer inversion in a 191-mm-diameter column using both experimental and CPFD approaches
Vivacqua V, Vashisth S, Hebrard G, Grace JR, Epstein N
Chemical Engineering Science, 80, 419, 2012 |
